1. Handling of wooden door scratches: If the wooden door is accidentally scratched, but does not touch the wood below the paint film, use a soft cloth to dilute a little dissolved wax liquid, apply it to the paint film and cover the wound. After the wax has hardened, apply one more. This can be masked by applying the coating several times.
2. In addition to the ink traces on the wooden door: add two portions of white vinegar in one portion of the water, wipe the ink marks on the wooden door with a sponge damp mixture, then wash and dry.
3, remove water marks: water marks usually take a while to disappear. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or cover the mark with a damp cloth, then carefully press the damp cloth several times with an electric iron, and the mark will fade.
4, in addition to the oil on the wooden door: residual tea is an excellent cleaning agent, after spraying a small amount of corn flour to wipe the test, and finally wipe the corn flour. Corn flour absorbs all the dirt adsorbed on the surface of the wooden door, making the paint surface smooth and bright.
5, white or light-colored wooden door yellowing treatment: white or light-colored paint on the surface of the wooden door, will change color over time, can be wiped with a rag and toothpaste.
6. Protect the hardware decoration: just wipe it gently with a dry cloth. Do not use detergent containing chemical substances.
7. Remove the stuck paper: completely saturate the paper with salad oil, and then gently rub it in the direction of wood grain with a special steel wool for wooden doors. After drying, varnish.
8. Desalination burn marks: The cigarette butts or unfinished matches leave scorch marks on the wooden door paint surface. If the paint surface is burning, you can put a fine-grained hard cloth on the matchstick or toothpick, gently wipe the traces, and then apply a A thin layer of wax, the scorch marks can be faded.
9. Scratch: If the wooden door paint surface is scratched and the wood is not touched, the same color as the wooden door can be applied to the wound surface of the wooden door to cover the exposed ground color, and then coated with transparent nail polish. One layer can be.
10, the removal of styrofoam: the surface of the solid wood door with excess styrofoam is a common thing in the process of installing solid wood doors. Once you accidentally put the styrofoam on the surface of the wooden door, remember not to rush to send it immediately. If the foam is wiped off, do not take it first. After the styrofoam is fully cured, pull it down with your hand and leave no obvious marks. Otherwise, the more you rub, the more sticky it is. A mess.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Water Drawing Board
Guangdong Jishengke Industrial Co.,Ltd , https://www.dgjskpad.com