The basic components of cabinet furniture include: panel, top plate (floor), partition (two types of activities, fixed), front frame, rear frame, side panel or side frame (including core frame, glass frame), door (glass) Doors, solid wood doors, curved wood doors), drawers (hollowed, solid, fiberboard), decorative strips (front, side), connecting wood (including triangular wood) dustproof board, hardware.
Front frame
1. It is used for the front of cabinet furniture, which is connected to the side panels and panels to form a whole body, and functions as a fixed door and a supporting drawer.
2, the basic components are: column (left, right), front horizontal scale (upper, middle, lower horizontal and inner horizontal), the thickness generally requires more than 20mm.
3, the front cabinet of the cabinet with a width of more than 36 must be designed with 1pc of vertical column support to increase the structure. Such as: dressing table, cupboard and so on.
4. The front column is to prevent collapse due to the pushing position. In principle, it must be chamfered when it comes into contact with the ground.
5. The shape of the front cabinet varies according to the design needs of the product.
Related reading: What are the technical standards for cabinet furniture?
6, whether it is parallel, or curved front frame, the structural requirements are consistent.
7. All components must be square and symmetrical (curved parts). After assembly, the inner diameters must be parallel and consistent between the horizontal and the whole, and the whole should be flat and square, and the structure is strict.
8. The purpose of pulling the side plate groove of the column is to opaque, so there should be sufficient margin for the depth and width of the groove to facilitate the assembly of the side plates. After the side panels are assembled, the side of the front frame and the side panels must be parallel (allowing error ± 0.2 mm).
9, all parts must be flat sand machine width, thickness, outer diameter allow (after the frame is composed) +0mm-0.5mm, horizontal, vertical, the door, the drawer must be sanded.
microfiber towel is super soft with extra plush and superior silk edge. It will not scratch your car or any surfaces upon use. It will not be discolored in wash and promises you a worry-free detailing.
Car Clean Towel
Changshu Juhao Clean Textile Co., Ltd. , https://www.juhaoclean.com