1. What are the operating rules of the collating machine?
Answer: The operation rules of the pager have the following points:
(1) All preparations should be done in front of the machine, such as lubricating oil, rough inspection of the main parts, adjustment of each block gauge, and placing the entire signature on the appropriate position;
(2) After storing the signatures in the signature bucket in sequence, the depositor will take out one of each post and check whether it is correct with the sample book. The collation, assistant, and depositor (or squad leader) shall confirm the correctness. Before collating;
(3) The stored hanger post must be smooth, empty, and the height of the hanger post should not exceed 150mm.
2. What are the operating procedures of the wireless glue binding online linkage host?
Answer: The operation rules of the mainframe include the following points:
(1) Make all preparations before starting the machine, such as rubber storage materials, heat storage glue in advance, adjust the temperature of the glue, add lubricating oil, roughly check the main parts, adjust the rules, check whether the book block and cover are correct, etc .;
(2) Signals must be sent before starting the machine, taking care of the cooperation of the front and rear machines, and clicking the car to try to open, gradually changing from slow speed to normal speed;
(3) During normal operation, it is necessary to observe the condition of the equipment and the qualification of the packaged books at any time, and ensure that the bonding, clamping, and shaping work are completed within the opening time of the glue to ensure the normality of the opening, curing, and cooling times;
(4) Observe whether the glue temperature is normal at any time. It is strictly forbidden to change the use temperature of the glue and store the glue block directly into the working glue pot for use;
(5) In the case of cleaning the glue pot on time to ensure the purity of the colloid and the cleanness of the glue pot and the normal operation of the equipment, the pre-glue pot is cleaned once every quarter and the glue pot is cleaned once every two weeks.
3. What are the operating procedures of the wireless glue binding online cutting machine?
Answer: The operation rules of the book cutter mainly include the following:
(1) Make all preparations before starting the machine, such as adding lubricating oil, checking whether the main parts and the cutting rules are correct, whether the cutter head and conveying track are clean, and adjusting the cutting rules and pressure;
(2) Send a signal before starting the machine, drive the empty car first, and then cooperate with the host machine after the empty cut is correct, then the normal operation can be cut;
(3) When the book is cut and the book is uneven, you must stop and handle it. It is strictly forbidden to grab the knife (that is, touch the book with your hand without stopping), and check the size of the book you are cutting at any time. deal with.
4. What are the operating procedures of the wireless glue binding linkage line wiping inspection equipment?
Answer: The operation rules of the cleaning equipment mainly include the following points:
(1) Wipe the equipment on the entire production line on time to ensure that there is no oil stains and the air path is smooth;
(2) During the wiping inspection, the problem that needs minor repairs or the replacement of vulnerable parts should be solved immediately, and the normal operation of the equipment after the wiping inspection must be ensured;
(3) In the case of normal operation of the equipment, the single shift (8 to 12 hours / day) will be scrubbed once every two weeks, and the 2 or 3 shifts (16 hours / day or more) will be scrubbed once a week. The scrubbing time is generally 4 hour.
Beauty And Personal Care Products
PLLA Filler, as injectable poly-l-lactic acid is used to create structure, framework, and volume to the face. PLLA is known as a bio-stimulatory Dermal Filler, this means it stimulates your own skin to produce new collagen. Over time your skin breaks down PLLA into water and carbon dioxide.
As we age, the fat, muscles, bone, and skin in our face begins to thin. This loss of volume leads to either a sunken or sagging appearance of the face. Injectable poly-l-lactic acid is used to create structure, framework, and volume to the face.
Body Care,Eyes Care,Face Care,Hands And Feet Care
Rimless Industry Co.,Ltd. , https://www.rebornplla.com