Cutting
At the top/bottom of the pumpkin , cut the melon with a knife to reach out and smash the melon. The cut surface should be as flat as possible. Cut out and thin, use a special spoon or a daily spoon, and carefully pour out the seeds and melons. Select the place where you are going to engrave and scrape the piece of skin to a thickness of 1 inch.
Paste paper Facebook
At the selected place, glue or nail the paper face prepared in advance. When using the pushpin, be careful to pin the dotted line on the face to avoid small holes on the melon.
Traced along the dotted line
Trace the face on the pumpkin skin with a small cone or pushpin along the dotted side of the paper's face. After finishing, tear off the paper Facebook.
Watching effect
Finally, use a small awl to correct it point by point. Picasso is far behind!
Aluminum alloy full-length mirror, aluminum alloy full body mirror, aluminum alloy arch mirror, aluminum alloy floor mirror, aluminum alloy fitting mirror
Xingtai Wosen Mirror Industry Co., Ltd , https://www.wosenmirror.com