First, take a bath for the salt spray test machine and then go to work.

For the salt spray test machine that has not been used for a long time, the salt spray test machine is now "on the job". According to experts, the salt spray tester needs to be repaired before it is reused for a long time without being used. In case of long-term use, the test box line is aging, and the electrical components are too dusty to cause the reaction to be insensitive. Maintenance precautions are as follows:
1. Thoroughly clean the working chamber and water seal tank with clean water, and clean the nozzle to prevent salt crystallizing and block the nozzle.
2. Before re-booting, the electrical system should be checked as necessary.
3. Check if the pressure regulating valve is within the set range.
4. Check for water in the saturator and drain through the drain valve.
5. Discharge the oily water from the salt water test machine oil water separator.

6. The nozzle is found to be clogged with dirt. The nozzle can be removed, washed with alcohol, dimethyl 1:1 hydrochloric acid, or with ultra-fine steel wire, but the surface finish of the inner cavity of the nozzle should not be damaged, so as not to affect the spray quality.

The Labeling Machine is a device that sticks the roll of self-adhesive paper labels (paper or metal foil) on the PCB, products or prescribed packaging. The labeling machine is an indispensable part of modern packaging.

China Labeling Machine,Label Machine supplier & manufacturer, offer low price, high quality Tube Labeling Machine,Automatic Labeling Machine, etc.

Labeling Machine

Labeling Machine,Label Machine,Tube Labeling Machine,Automatic Labeling Machine

Jining Myway Machinery Co., Ltd. , https://www.mwpackall.com