For water leakage, if such a situation is present in the decoration, it will not only cause unnecessary economic losses to many families, but will inadvertently damage the otherwise friendly neighborhood relationship. How can I prevent the onset of leaks and how can I be concerned about waterproofing in bathroom renovation?
Try not to damage the original waterproof layer
In those newly delivered and used units, the floor of the clean room, bathhouse and kitchen is generally provided with a waterproof layer according to the relevant standards. Therefore, if the original waterproof layer is not damaged, leakage will not occur after occupancy. Conditional. Therefore, the common problem nowadays is that during the renovation, some bathing facilities for cleaning rooms will be added and various upper and lower water pipelines will be planned or moved from scratch. They have now seriously damaged the original waterproof layer of the building. However, there is no repair or maintenance. Re-doing waterproof construction until the last episode of leakage was discovered.
Experience: The waterproof layer is easily damaged when decorating the ground from scratch. Therefore, when you decorate, you must remember to pay attention to the maintenance of the waterproof layer. If you accidentally damage it, it must be repaired in time to prevent danger.
Water tank groove waterproof in time
During the construction process, if the pipelines, floor drains, etc. cross the floor, the waterproof layer around the holes must be carefully constructed. The inside of the wall is buried with a good pipe, so that a reasonable plan can be made. The groove larger than the diameter of the pipe should be laid, and the groove should be remembered for plastering and oil slick. Finally, the groove is brushed with some polyurethane waterproof coating.
Experience: There is a need for slopes on the ground in kitchens and clean rooms, where slopes are properly increased. When the pipes in kitchens and clean rooms are decorated, they should be prevented from changing their original drainage and sewer lines and the position of floor drains. Damage to the waterproof layer leads to leakage.
24 hours "water storage experiment" test waterproof
After the completion of the waterproof project, close the door and the water outlet, fill the floor of the clean room with water to a certain level, and mark it. If there is no significant reduction in the liquid level within 24 hours, the roof of the house is particularly downstairs. There was no seizure leakage, and waterproofing was done. If the test is unqualified, it is necessary to do a full test of the water resistance project after the whole body has been used.
Experience: Regarding the inspection of light-weight wall waterproof construction, the water-spraying test should be adopted. Even if the water pipe is sprayed on the wall of the waterproof paint continuously for 3 minutes from top to bottom, another wall will be investigated for another 4 hours. Whether the side will show soaked appearance, if there is no soaking appearance, it can be qualified for wall waterproof construction inspection.
<\p><\div>
Kitchen Gadgets,kitchen gadgets you need,kitchen gadgets peeler,kitchen gadgets store,kitchen gadgets potato peeler
vchomy , https://www.vichenivchomy.com