During the operation of the copier, its optical system, mechanical system, and circuit system, in addition to normal wear and tear, are also damaged by dust and other debris from the inside and outside of the copier, resulting in poor copy quality and operational failure. Need us to properly maintain it, how to maintain the copier? The following decoration home decoration network Xiaobian will bring you a summary of the maintenance of the copier , I hope to provide help for everyone.
Why should the copier be maintained?
Regular copier maintenance can reduce the copier failure rate and avoid work efficiency due to copier failure. The maintenance of the copier is mainly to clean or partially adjust the optical, development, charging, transfer, separation, power-dissipation electrode fixing, transfer and other components of the copier and the toner recovery system. Usually, the foreign matter in the optical system causes the bottom of the copy to be heavier, black spots appear, the debris in the mechanical system may cause paper jam, and the copy appears smudged. Therefore, in daily work, we must pay attention to the cleaning and maintenance of the copier.
Copier maintenance content summary:
1. Maintenance of the cover: Due to contact with various originals and being touched by hand, the white plastic lining or the conveyor belt will be blackened, resulting in black stains on the corners of the copy. Wipe these detergents repeatedly with cotton gauze, then wipe with water and then dry. Note: Do not wipe with organic solvents such as alcohol or ether.
2. Maintenance of the platen glass: Since the platen glass is easily stained by the manuscript and the hand, it is also easy to be scratched, so it should be cleaned and maintained regularly to ensure good copying effect. Avoid direct contact with the platen glass during work. If there is binding, remove the pins, paper clips, staples, etc. from the original and place them in the designated position. The altered original must wait until the correction fluid has dried before copying. When cleaning the platen glass, avoid wiping with organic solvents. Because the platen glass is coated with a light-transmitting coating and a conductive coating, these coatings are insoluble in water and soluble in organic matter.
3. Maintenance of the circuit system: The circuit system works under high pressure for a long time, and absorbs a large amount of dust, which causes the electrical resistivity between the electronic components to decrease, causing the current to break through the electronic components and burn the circuit board. The cleaning of the following sections should be carried out by professional technicians: cleaning of the optical system, cleaning of the mechanical system, cleaning of the paper feed system, and cleaning of the paper exit system.
4. Remove the used ink cartridge: Carefully remove the old ink cartridge of the waste copier to prevent the toner from being inhaled in the air and being inhaled by the human body.
5. Replacement parts: Consumable parts of the copier (such as cleaning blade, electrode wire, separation claw (sheet), pickup roller, etc. after copying to a certain number of sheets, these parts are not provided free of charge during the warranty period. Due to wear and tear, it may be necessary to make the necessary replacement. The cost of such repairs and spare parts costs is normal and should not be considered as a quality problem.
The above is what Xiaobian brought to you. Why should the copy machine be maintained? For the entire contents of the maintenance of the copier, I believe that everyone has a basic understanding of the maintenance of the copier after reading this article. If you want to know more about the decoration consultation, please click to enter the decoration knowledge channel.
More related wonderful reading:
How to choose a copy machine? Copier purchase considerations
What are the benefits of copier rental? Copier rental price influencing factors
What are the hazards of the copier? How to prevent copy machine hazards?
What are the copier supplies? How to choose copier supplies?
What is copier toner? How to add copier toner?
All Metal Cupboards are also fit your home storage.
A lockable half height metal cupboards is an ideal printer stand.
Most people do not want to have to give up part of their desks to put their printers, this counter height storage cabinet give you a great place to keep extra paper, ink, office stationery.
Of course, metal cabinet with glass doors or net doors delivers a modern look that suggests both style and function.
You can choose the cabinet with legs.
The cabinets are elevated from the floor and you can easily mop and vacuum under them.
Door opening styles are swing, sliding, tambour sliding, and usually three heights for choices, tall,mid,counter heights to meet home office storage demands.
Office Storage Shelf,Counter Height Storage Cabinet,2 Door Cupboard for Sale
LUOYANG SHIDIU IMPORT AND EXPORT CO., LTD , https://www.shidiucabinetes.com