[ Chinese wardrobe network ] First, the normative design
1. Generally speaking, each storage space of the wardrobe is exquisite. The height of the hanging short coat or tops is not less than 800mm; the height of the long coat is not less than 1400mm; the height of the drawer is not less than 150mm~200mm; as for the cabinet with stacked clothes, the width of the folded clothes, The width of the cabinet is between 330mm and 400mm and the height is not less than 350mm. The top of the whole wardrobe is designed with the top cabinet, and the unused items such as quilts are placed, and the height is not less than 400mm.
2. Due to the different structure of each type of house, pillars and beams may appear on the wall of the installation cabinet. When designing, the limited space should be utilized as much as possible to maximize the use of the storage space of the cabinet without leaving a sanitary corner.
3. In addition, according to the rationalized design standard, the height of the cabinet is usually 2400mm or 2300mm, and the height of the standard commercial room is 2.8m, so the wardrobe will be divided into two layers. The upper layer is placed on the quilt and other unusable items are the top cabinet. Below, there is space for clothing that is often used.
Second, pay attention to details
1. Accessories: The design of the accessories must first consider the available space inside the wardrobe, avoiding the lack of space in the wardrobe, and designing too many accessories. On the one hand, the internal space of the wardrobe will be wasted, and the storage effect will not be achieved. It may cause some accessories (such as connectors, screws) to not work properly;
2, color: the choice of the color of the wardrobe must be consistent with the overall decoration of the home. If the home is dominated by warm colors, the color of the wardrobe can not choose the appearance of the cool color, the wardrobe should be a beautiful landscape at home, it is recommended Choose a natural-looking color look to match your home style.
Third, the standard design of the wardrobe
1. The side panels and laminates of the closet need to be loaded with 18mm thick melamine pressure medium density fiberboard. The cabinet board must have the national authoritative test report, in line with the national mandatory standard GB18584-2001 standard, formaldehyde release The quantity is ≤1.5mg/L, the water content is between 5-11; if the back plate does not need weight bearing, it can be made by 5mm thick, which can save cost. If the condition allows, the thickness of the door and back plate should be 9mm. For the wall cabinet, the back plate needs to use 18mm thickness and the density standard is 0.6-0.9g/cm3 to enhance the firmness of the wall cabinet;
2, although the overall wardrobe is tailor-made products, but there are also standard and non-standard points, the standard parts are calculated according to the specifications of the plate, the manufacturer can maximize the use of the plate, the sealing is generally uniform, can not see Black lines and sawtooth marks; non-standard parts will waste a lot of plates, so the price, non-standard price will be more expensive;
3, the metal frame of the closet door, the door frame has two kinds of carbon steel and aluminum. Carbon steel is easy to rust, and currently it is dominated by aluminum. Aluminum materials include aluminum-magnesium alloys, aluminum-titanium alloys, and the like. Titanium has high strength, small specific gravity and high price. In fact, even aluminum-titanium alloys have the problem of high titanium content. In general, with the fingers, the aluminum-titanium alloy sounds crisp and the metal feels stronger. The minimum metal wall thickness is required to reach 1.1mm.
4. The wardrobe door panel is made of glass, plate and other materials. The thickness of the glass is 5mm. The texture of the wardrobe door is frosted glass, clear glass, cloth glass and embossed glass.
5. The material of the sliding door track is: aluminum alloy, galvanized steel. The styles are: insert ceiling, side suspended ceiling, single rail, double rail. Door rails should be equipped with anti-collision dustproof devices and positioning systems. Prevent heavy objects and sharp objects from hitting the track, keeping the track straight and smooth.
6, top wheel and bottom wheel, ordinary door wheel shell is electroplated, easy to rust, the wheel is made of ordinary engineering plastics, easy to wear? High-grade door wheel is stainless steel shell, high-precision bearing, smooth, no swing, pulley Special anti-jump device. The wheels are made of carbon fiberglass and can be pushed and pulled more than 100,000 times under a load of 180 kg. Some use ordinary plastic (may be engineering plastic or nylon) door wheel, oil on the door wheel to reduce the sound, cover up the defect, but in the future, it will stick a lot of dust, leaving behind trouble.
Massage And SPA Essential Oil Set
Ylang Oil,Geranium Oil,Peppermint Oil,Thyme Oil
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxnaturaloils.com