After using the electromagnetic expansion method as the equipment energy-saving design and the original imported human-machine interface temperature and humidity controller, the xenon lamp aging test box is more and more in line with the international emerging technology, with reliable performance, easy operation, and control technology to catch up with the current international advanced level. The cost performance is obviously superior to that of similar imported test equipment, and it is an ideal equipment for conducting full sunlight spectrum test.
For the increasingly good Xenon lamp aging test box, the efficiency of the refrigeration system is even higher, so for the core component of the refrigeration system, the probability of failure and the frequency of failure are greatly reduced. But once the test chamber compressor fails, it will be a fatal fault for the equipment. Therefore, we must pay enough attention to the failure of the compressor, and strictly follow the following inspection steps and solutions:
First, the xenon lamp aging test box inspection steps:
1. Please check the position of the equipment, whether it is more than 30 cm away from the wall;
2. Whether the surrounding area is a confined space.
Second, the solution:
1. If not, please keep the position of the machine 30cm or more, because the poor heat dissipation will cause the compressor running current to rise, and the overcurrent protector will operate;
2. If the surrounding area is a confined space, the temperature rise will occur in the environment, and the compressor operating current will rise, so that the overcurrent protector (heat accumulator) will operate, so keep the surrounding air ventilated;
3. After all the above problems have been solved, please immerse the xenon lamp in the test room under the three electromagnetic switches in the machine room (heat accumulator). The reset button goes to the next pressure. If you hear a click, it means that the compressor controlled by the one is overloaded, but it is also reset at this time. At this time, please set the current set value to 1.25 times of the rated current of the compressor.
As long as the xenon lamp aging test box compressor is not a serious irreversible fault, it is necessary to carry out component replacement and maintenance. As long as we follow the above inspection steps and solutions, ordinary compressor abnormal problems will be solved and a normal xenon lamp will be solved. Aging test box.
ASLI typical customers:
â—† Liaoning Seismological Bureau â—† South China University of Technology â—† Ningbo Materials Research Institute â—† Shanghai Coating Technology Research Center â—† Germany TUV in Shenzhen Laboratory â—† Sichuan Oulipu Lighting Co., Ltd. â—† Shenzhen BYD Auto Co., Ltd. â—† LG Electronics (Huizhou) Co., Ltd. â—† Truly Semiconductor (Iris) Co., Ltd. â—† Guangdong Saiyu Sapphire Technology Co., Ltd. â—† Zhongshan Youxin Auto Parts Manufacturing Co., Ltd.
P-type Traction Rope,traction rope,rope tug toys for dogs
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproduct.com