[ Chinese wardrobe network ] If cosmetics is a woman's "good friend", then the wardrobe is the box to protect the "friends" shirt. This issue of Xiaobian said that the maintenance of the wardrobe.
The maintenance of the wardrobe is all about temperature and humidity. Everyone knows that wooden furniture is sensitive to these two points. The following small series talk about the temperature and humidity of the wardrobe maintenance. Let’s take a look!
temperature
Wood furniture is sensitive to temperature, and the change in temperature plus the inherent thermal expansion and contraction of the wood itself can easily deform the panel of the wardrobe. So what can we do to avoid damage to the wardrobe?
1. The position of the wardrobe should be kept away from heat sources (for example, air conditioning vents, heaters, etc.), and the wardrobe should not be placed in direct sunlight;
2, try to choose the quality of the closet veneer, the quality of the closet veneer can withstand the impact of temperature changes, not easy to blister off.
humidity
The slab closet is damp for a long time, and the sealing joint will expand and deform due to the increase of water content. If it is serious, it will cause the board to crack. Therefore, we must reduce the damage of the air humidity to the wardrobe.
1. Resolve from the source, avoid placing the closet in a damp place (such as the toilet or bathroom), and avoid placing the container with water next to the closet to avoid knocking over the wet wardrobe;
2, in the weather with high air humidity, you can use some dehumidifier in the closet. At the same time, lime and dehumidifier can be used to reduce the indoor air humidity;
3. Choose the veneer with less water absorption. If it is a solid wood veneer, you can choose ash and teak, the expansion and contraction rate is small, and the water absorption rate of maple is large, you need to choose carefully;
4, protect the edge of the wardrobe sheet, avoid touching water or other solvents, otherwise it is prone to edge off. Edge sealing is very important for the moisture resistance of the wardrobe sheet, which can isolate the moisture in the air from the contact with the wardrobe sheet;
5. If the unfortunate wardrobe is drenched with water, you should take "emergency measures" at this time. You should immediately use a dry towel to remove the water, then use absorbent cotton or absorbent paper to blot the remaining water, or blow it off with a hair dryer, but avoid blowing the mouth too close to avoid damaging the wardrobe finish.
The above is the content of "The Wardrobe Maintenance" introduced by Xiaobian for you, I hope to help you.
We can make different Angle Bracket,Joint Brackets,Bookcase Brackets,Shelf Brackets,U Brackets,Ceiling Brackets,Suspension Brackets,Shelf Brackets,Mounting Brackets,Headboard Brackets,Table Leg Bracket,Furniture Bracket, for you.
Furniture Bracket,Leg Bracket,Headboard Brackets,Angle Bracket,Joint Brackets,Bookcase Brackets,Shelf Brackets,U Brackets,Ceiling Brackets,Suspension Brackets,Shelf Brackets,Mounting Brackets,Corner Bracket,Customized Bracket,Light Mounting Bracket
MGX Metalworks Co., Ltd. , https://www.mgx-metal.com