Recently, the General Administration of Quality Supervision, Inspection and Quarantine issued a warning on the quality and safety of children's furniture. Among the 40 batches of samples collected from the market, there were 22 batches of products, including edges and tips, stability, hole and gap failure.
The reporter learned from the website of the General Administration of Quality Supervision, Inspection and Quarantine that the Quality Supervision Department of the General Administration of Quality Supervision, Inspection and Quarantine recently organized the monitoring of the quality and safety risks of children's furniture products. A total of 40 batches of samples were collected from the market, mainly based on GB28007-2011 " General Technical Conditions for Children's Furniture" to test the structural safety and warning signs of children's furniture. The results showed that there were problems with 22 batches of products. Among them, 20 batches were detected with edges and tips, and there was a risk of bruising or scratching; 3 batches were found to be unsatisfactory in stability, and 3 batches of drawers were not installed with anti-pull device, and there was a risk of bruising; 2 batch detection holes and gaps are unqualified, there is the risk of jamming or pinching; 16 batches of warning signs are unqualified, and there is a risk of misuse.
To this end, the General Administration of Quality Supervision, Inspection and Quarantine reminds consumers that when purchasing and using children's furniture products, attention should be paid to the structural safety of the products and the risk of warning signs missing.
First, try to choose a formal channel to buy children's furniture. For products without warning signs, no brand models, no applicable age segments, and no instructions for use, purchases should be avoided.
Second, when purchasing, you should carefully observe whether the edge, tip or protruding part that can be touched has been rounded. You can feel the hand or the hand cutting by touching the finger, avoiding the purchase of edges, tips and protrusions. Untreated product.
Third, when purchasing, you should carefully observe whether the holes and gaps in children's furniture have the risk of pinching children's fingers, and avoid buying products with unreasonable hole and gap design.
Fourth, when purchasing cabinet children's furniture, you should pay attention to observe whether the stability is good enough. You can shake it by hand to see if there is any risk of dumping, and avoid buying products with poor stability.
Fifth, when purchasing closed children's furniture, you should pay attention to whether there is a venting hole to avoid the purchase of closed furniture without venting holes.
Sixth, when purchasing children's furniture with folding mechanism, it should be noted whether the folding mechanism has a manual positioning device to avoid purchasing products without manual positioning device.
Seventh, when purchasing children's furniture with flaps and flaps, you should pay attention to confirm the flexibility of closing the flaps and closing the flaps. If the products are too flexible, there may be a risk of bruises when closing, and purchase should be avoided.
Hand-Woven Bag,Hand Woven Bags,Handmade Straw Bags,Straw Handmade Bag
Shandong Guyi Crafts Co.,Ltd , https://www.guyicrafts.com