Child safety seats, also known as children's life protection umbrellas in traffic accidents, need not be more important. However, some companies choose to ignore the huge security risks of products in order to pursue profits and reduce costs. Recently, the state supervised and inspected 17 batches of child safety seats produced by 17 companies. After inspection, it was found that 5 batches of products were unqualified, and the unqualified rate reached 29.4%.
According to the inspectors, the most prominent problem in the national safety of the child safety seat is that the combustion characteristics of some of the products are unqualified.
The safety seat is a car accessory for children. The environment can only be used in the car. When the car is spontaneously ignited by high temperatures, or when it is accidentally caught in a car accident, the child safety seat should have the same reliable flame retardancy as other car interiors, and try to delay the spread of the fire so as to avoid giving children and other occupants. Bring additional personal injury.
However, after testing, it was found that 5 batches of the 17 batches had unqualified combustion characteristics, and the unqualified detection rate was 29.4%.
Some product identification and installation and operation instructions are unqualified
In addition to the unsatisfactory combustion characteristics of the materials, the child safety seat supervision and spot check also found some product identification and installation, the use of instructions failed. And a small manual failed, and once more than once let consumers pay the price of life.
According to the national mandatory standards, the child safety seat must be equipped with instructions for installation and use, and the product must be printed with the correct use mark. However, in the process of sampling, there are three lack of instructions and warnings for the child safety seats produced by the company. Not only can they not provide guidance, but they may even mislead consumers during installation, which brings hidden dangers to children's safety.
Seats for children under 13 kg must be installed backwards
According to the standard, safety seats suitable for children under 13 kg should be installed in the rear seat of the car. However, the inspectors found that although the child safety seat manufacturer drew a rear installation diagram in the manual, it did not give an important reminder that "children under 13 kg must be installed backwards."
The tester told reporters that "13kg or less" is generally equivalent to the weight of infants under the age of three. The lack of this important suggestion may cause some parents to let their children sit on the seat that is installed in the forward position. The safety seat not only does not protect, but may even cause fatal injuries to the child.
Although this is an omission that does not seem to be eye-catching, it can cause fatal injuries to children in the event of misuse. In May 2013, a car accident occurred in the United States. A child who was only 11 months old was sitting in a positively mounted safety seat because of a mistake. When a car accident occurred, it was instantly thrown out. Eventually, the head was seriously injured. Death died after being rescued.
Always avoid the seat with airbag when installing backwards
In the interview, the inspection engineer told the reporter that in addition to the weight requirement, there is another limitation in the backward installation. That is, the child safety seat cannot be installed in the seat with the airbag when it is installed backward. And it is such an important limitation that there is no hint in the manual of this product.
Although on the surface, there is only one warning in the manual, but the potential safety hazard to the child may be irreparable.
Natural Bamboo Pizza Peel,Silicone Oil Brush,Fireproof Charcoal Bbq Grill Mat,Bbq Floor Mat,Food Heater pan
vchomy , https://www.jsvichen.com