There are printers in many places, printers can provide us with a lot of convenience, but the printer's nozzles also need us to carry out daily care. If the nozzles are often blocked, it is necessary to clean the nozzles, then the printer nozzle cleaning method What are the printers? How much is the printer nozzle? Next, let me introduce you to the small series of the decoration home network.
First, the printer nozzle cleaning
1. Click Maintenance, then click Nozzle Check to pop up the printing. If there is a broken wire, the printer nozzle is blocked. Use the included print head to clean it twice. If there is a broken wire, it means there is a heavy blockage. Take a needle 80-100 degrees of hot water and slowly push 1-2ml into it, soak for an hour, if the print test is still not working, the blockage is more serious.
2. Clean the channel between the specific ink tank ink tube and the nozzle. It is necessary to dissolve the ink and ink sticks that have condensed in the channels. Carefully clean and dissolve the ink that has dried up the nozzle and orifice. The ink remaining and dried outside the printer nozzle is washed and dissolved.
3. Use a small container to hold warm water with a height of 1cm and a temperature of 6 °C, then immerse the end of the printer nozzle with warm water, soak it for a few hours and take it out (be careful not to let the PCB contact water), then use water absorption. Strong paper carefully wipes the water off the printhead and finally installs the printhead back into the printer. Just a few prints. Maybe the color is lighter, and printing a few more will return to normal.
4. The water cleaning method is suitable for the printers with separate nozzles and ink cartridges on the market. First find a few ink cartridges that have run out of ink on this printer, pry them open, take out the sponge inside, and put in a new sponge. Put in a new sponge and wash it with pure water before putting it in. Remove the original ink cartridge from the printer, replace it with the freshly filled ink cartridge, use the printer's cleaning nozzle function, clean the nozzle multiple times, and then try to print a document or picture until it is printed. When the blank paper is blank, the nozzle is cleaned, and finally the original ink cartridge on the printer is loaded.
Second, how much is the printer nozzle
The printer nozzle is only one component of the printer, so its price is very cheap compared to a printer. However, the price varies depending on the brand. But even the more expensive brands will not be expensive, and generally buy a better printer will send a spare printer nozzle. Therefore, the price of printer nozzles in the market is generally between 80 yuan and 300 yuan. However, I don't think it is too safe to buy a price that is too cheap. It is not necessary to buy too expensive. You can choose according to your actual situation.
In many places, printers are often seen, but the printer nozzles also need to be cleaned. How to clean the printer nozzles and how much money, read the contents of the above small series, everyone knows about these, then if you want To learn more about decoration, stay tuned to the decoration home.
More related wonderful reading:
How to clean the printer nozzle when the printer nozzle is blocked
Multifunction design, it can be used as angle scraper, glass glue blade, adhesive residue scraper, and seam repair tool.
The spatula is finished with corners with different angles, allowing you to choose the appropriate tip for the job.
It does not scratch the surface on which the silicon is being Now you can prevent any loose edges of silicone that trap moisture.
Caulking Tool Kit,Professional Caulking Tools,Caulk Finishing Tool Set,Silicone Calking Tool
jiangsu concentric internatinal ltd , https://www.jsconcentriccorps.com