When we are decorating the kitchen, the beauty and practicality should be our first choice, and the good cabinet door can easily do this. In addition to the basic functions, various materials and colors directly affect the style and practicality of the kitchen. Sex. Therefore, it is especially important to understand the types and characteristics of cabinet doors in the renovated kitchen.
All aluminum honeycomb panel
The all-aluminum door panel is a high-grade material with good paint surface treatment in the kitchen cabinet door. The surface is smooth, rich in color, resistant to discoloration, non-aging, the surface is as permanent as new, the surface hardness is strong, and the corners collide normally without cracking. Paint off, not easy to scratch, no osmosis on the surface, excellent waterproof performance, environmental protection function to reach the national E1 level, product function is not chaotic, after-sales service and other advantages, praised by customers. All-aluminum door panels are the products with a minimum formaldehyde content in many door panels. The benzene content is basically zero, which is truly a green product. Aluminum to replace wood for the benefit of consumers! Advantages: 1, fire: aluminum plate is non-combustible material. 2. Corrosion resistance: The aluminum honeycomb panel is treated with epoxy fluorocarbon and has strong corrosion resistance. The salt spray was sprayed for 48 hours without pinholes, cracks, and no bubbles. 3, environmental protection: Honeycomb panels are pure aluminum products, do not volatilize any harmful gases, no radioactivity and can be completely recycled, 100% environmentally friendly products. 4. The aluminum honeycomb panel is easy to disassemble and assemble, and the panel will not be removed. Due to its light weight and convenient transportation, it can be transported to different places for repeated use. This is something that other plates cannot match. 5, from the scientific and technological achievements of modern aviation, the weight is lighter, but the strength of the plate is higher! More suitable for the door panel core board;
Paint door panel
The paint door panel is the most widely used door panel. The base material of the paint board is MDF. The surface is baked at a high temperature through six spray-in paints (three bottoms, two sides, one light), so the paint material is flashing and modern. The piano-like luster is the biggest feature of the lacquered panel. The high saturation of the color makes the cabinets have a visual impact, adding a modern energy to the kitchen. The current "painting" for cabinets only illustrates a process in which the substrate panels are treated with a paint that is warmed and dried in the oven after painting. According to the different paints on the surface paint, it is divided into ordinary paint, piano paint, tempered paint and so on. The surface brightness and strength of ordinary paints are not comparable to piano paints, and piano paints are not as good as steel paints. The disadvantages are high technical level and high rejection rate, so the price is high; the use should be carefully sheltered, afraid of bumps and scratches, once it is damaged, it will be difficult to repair, and the whole should be replaced; the kitchen with more fumes Easy to get chromatic aberration. It is more suitable for young and high-end consumers who are more suitable for appearance and quality. In addition, some unscrupulous manufacturers on the market today use natural drying after painting to replace the baking varnish technology, you must pay attention. The difference between the two is that since the baking varnish is baked at a high temperature in the paint booth, the surface hardness is large, it will not be as soft as after drying, and the flatness is good, there will be no trace of lacquer layer, and, The dry door panels are easily discolored, and the corners of the door panels often have a transparent effect.
Fireproof board
The base material of the fire door panel is a particle board, a moisture-proof board or a density board, and the surface is decorated with a fireproof board. (Fireproof board is a decorative board made of silicon material or calcium material as the main raw material, mixed with a certain proportion of fiber material, lightweight aggregate, adhesive and chemical additives, and made by autoclaving technology. The requirements for sticking glue are relatively high, and the price of fireproof board with better quality is more expensive than that of decorative panel. The thickness of fireproof board is generally 0.8mm, 1mm and 1.2mm, which is generally used as the veneer of cabinet door panel. The disadvantage is that the door panel is flat. Can not create three-dimensional effects such as bumps, metal, etc., the fashion sense is a little worse, more suitable for the appearance of the cabinet, general emphasis on practical functions of the middle and low-end decoration.
Solid wood board
Solid wood cabinets are used for cabinets above 9.2m. If it is an open kitchen, it needs at least 7.2m. The cabinet door made of solid wood has the effect of returning to nature and returning to the original. The style is mostly classical. The door frame is solid wood, mainly made of cherry wood, walnut color and oak color. The door core is medium density board with solid wood skin. It can guarantee the special visual effect of Mingmu, and the combination of the frame and the core board can ensure the strength of the door panel, and it does not crack or deform for a long time (the daily maintenance still needs to be very careful). The solid wood material tastes luxurious, returning to the natural visual and tactile sensation, and meticulously carving the decorative patterns. These can only be done with panels made of solid wood. For those who are looking for quality, solid wood panels are definitely the best choice. However, the price of solid wood panels is higher than that of other types of door panels, and it takes more time to maintain them. It is suitable for high-end decoration.
Triammine veneer
The full name of the melamine board is a melamine impregnated film paper veneer wood-based panel, which is a wood-based panel, which is considered to be a good one in the cabinet door material. It is prepared by putting different color or texture paper into the melamine resin adhesive, drying it, and then laminating it on the surface of particleboard or other medium density fiberboard, and then hot pressing. The material of the triamine-finished door panel is not expensive, and has the advantages of flat surface, easy deformation, bright brilliance, abrasion resistance and corrosion resistance. With a natural edge banding, it gives a visual effect that blends in one.
Plastic door panel (pvc molded plate)
The plastic plate substrate is a MDF, the surface is vacuum-blended or a single seamless PVC film forming process is used. The plastic door panel is rich in color, the wood grain is realistic, the single ** degree is pure, no cracking, no deformation, scratch resistance, heat resistance, stain resistance and fade resistance. It is the most mature cabinet material, and the daily maintenance is simple. The plastic door panel is a very mature and very popular kitchen cabinet material in Europe. It is divided into two types: matt molded plate and high-gloss molded plate, which can be processed into various shapes. The mask has a domestic entrance, and the entrance is generally imported from Korea, Japan, and Germany. The domestic difference between the inlets is the thickness and thickness of the face mold, and the wear resistance. The high-gloss molded door panel is a new material that truly replaces the painted door panel. The mask is currently only imported from Germany. The most popular in the market is Xilinmen. “SKC†(produced in Guangdong) has several colors, which are more expensive.
Crystal door panel
The crystal plate is made of a substrate with a white fireproof board and acrylic, which is popular in Europe. It replaces the traditional glass is fragile and fragile, and it has many advantages. Small workshop manufacturers use plexiglass. The standard manufacturer uses acrylic, environmental protection and three-dimensional shape. This kind of kitchen door has played a positive role in the design of the cabinet. The disadvantage is that the surface layer is easy to fall off, affecting the appearance, and the surface is easily scratched, and oxidation and discoloration occur in the air at normal temperature, and the gloss retention time is short.
Metal door panel
The metal door panel is a new fashion color in Europe. The bold and brave avant-garde has a personalized style and a sense of the times. The calm temperament brings a cold smell to the troubled kitchen. The structure is a metal plate or imitation metal plate which is specially oxidized, finely brushed and polished, and formed with a dense protective layer on the medium-density plate. The process is similar to that of the West Germany plate. The difference is that the West Germany plate is processed twice (fireproof) The board is veneered, and the metal door is directly formed in one time. The metal door panel has good wear resistance, high temperature resistance, erosion resistance and simple daily maintenance, fine texture, easy cleaning and long service life. Disadvantages: Expensive, suitable for high-end renovations that are in sync with the world.
Covered frame door
The frame-type door panel door frame substrate is medium-density board, PVC is outsourced, and the door core board is double-decorative board such as fireproof board. It is re-processed and stitched by the kitchen cabinet company; its strength is rich in color, and the frame and double decoration board can be matched with any combination. .
Mirror resin board
Mirror resin board is still used in the cabinet market. Its properties are not much different from the paint door panels, which is fashionable, colorful and waterproof. However, the mirror resin board is not wear-resistant, easy to be scratched, and the high temperature resistance is not very good, so consumers who have high color requirements and pursue fashion can choose the cabinet of the mirror resin board, but because of the easy drawing, the use time Should pay attention to maintenance. XI) The aluminum alloy door frame glass door panel reflects a modern sense. It is very popular at present, and it plays a role in the whole set of kitchen cabinets. The interior is inlaid with a delicate glass texture and has a long history. The material of the cabinet door is good, depending on the decoration style of the kitchen, the decoration budget and the living habits of the owner. High-grade decoration, suitable for the door panel of the paint door panel and solid wood board; the simple and fashionable kitchen decoration is suitable for the crystal plate, the double-framed door panel, etc.; the pursuit of practical, clean and convenient, it is not suitable for the door panel of solid wood and mirror resin.
In the purchase of cabinet door panels, understand the characteristics of various types of door panels, and you can purchase satisfactory products as needed. Generally speaking, from the perspective of health and environmental protection, the aluminum honeycomb panel is the highest, and its characteristics are in line with ordinary household use. From the perspective of environmental protection and beauty, the solid wood door panels are the most natural wood, but the price of pure solid wood doors is high. The aluminum honeycomb panel in the middle of the two is lower than the price of solid wood, higher than the fireproof board, easy to use and beautiful, and is the best choice for many young consumers who are pursuing fashion and high-end.
Travel Bags,Travel Bags For Men,Travel Backpack For Women,Best Travel Backpack
Ningbo Happiness Stationery Industrial & Trading Co Ltd , https://www.bagshappiness.com