How to maintain the horizontal vibration table?

How to maintain the horizontal vibration table? The maintenance of the testing machine is a long-lasting process, and we must carefully observe that Haida Xiaobian advises the user to arrange for someone to be responsible for the maintenance and maintenance of the testing machine. Below, Haida Xiaobian is sharing the maintenance method of the horizontal vibration table for your reference. :

1 , control box maintenance:

1 ) The surface is clean and clean

2 ) The control panel checks for bad or bad contacts, repairs or replaces spare parts

3 ) If the power outlet is loose or burned, tighten the bolts or repair

4 ) The display panel comes off, tighten the bolt

5 ) Loosen the chassis shell screws, repair or tighten

2 , table body maintenance:

1 ) Clean up dust, debris or stains on the surface

2 ) Check the fixing bolt for looseness and tighten

3 ) whether the surface is covered with dust, oil, water droplets, clean up in time

4 ) The output wire is a damaged insulation or the connector is loose, detached, re-insulated or tightened.

5 ) When there is vibration, whether there is abnormal sound or odor, judging according to hearing, sight, smell

6 ) Use internal air pump and vacuum cleaner to clean internal dust and debris every quarter

3 , table foot cup holder maintenance:

Check the level of installation, do not have four sides uneven or loose screws, resulting in vibration, tighten the set screw, adjust the flatness of the foot cup holder.

4 electromagnetic vibration level adjustment:

1 ) After a certain period of use, the unevenness of the test item will cause a large horizontal deviation .

2 ) Check the level of the fixed foot cup on the ground.

3 ) Loosening the spring steel screws, tighten the screws according to the position of high vibration and small vibration direction to increase the difference between height and height.

5 , internal code:

1 ) Due to wrong settings or malfunctions.

2) control a reset input side, and then setting the conditions of steps to be tested, such as a single set of: â‘ â‘¡â‘¢ ....

3 ) When setting a new internal code, it must not be set during operation, and each code ( internal code ) can be set once to save. Do not repeat the setting.

6 , table screws:

1 ) The screws on the table body will loosen or fall off when used for a long time. Check the screw looseness periodically;

2 ) Open the shield and tighten the screws with the wrench.

7 , steel sheet:

1 ) Due to the stacking of objects and long-time vibration, the steel sheet may be deformed or crashed to generate a fracture.

2 ) If there is a rupture, replace the screws.

3 ) Power socket: whether there is heat or darkness on the wire end and wire diameter

 

How to maintain the horizontal vibration table? In order to ensure that the equipment is always in a good state of technology, it can be used at any time. The maintenance of the equipment is indispensable and should be paid attention to by the operator. More horizontal shaker information is available at Haida Instruments. Welcome to inquire.