[ Chinese wardrobe network ] 1, booking scale
After selecting the brand, the second step in customizing the wardrobe is to make an appointment. The appointment ruler is usually to go to the brand's physical store to make an appointment. After the appointment, the designer will come to the door for free at the appointed time. For rough rooms, hardcover rooms and second-hand houses, the timing of booking a ruler is slightly different. It is best to make a reservation for the roughing of the rough and second-hand houses before the hydropower project, so that the custom designer can help you determine the water potential of the space according to your needs. This means that if the rough room decoration, second-hand house renovation, ground construction, it is necessary to determine the approximate size of the custom wardrobe products.
During the appointment of the scale, be sure to fully communicate with your designer about your needs and preferences, and discuss the initial design with the designer. After the renovation project around the location of the custom closet product, the designer can go back to the ruler to determine the fine size. After the split, the designer will create an original plan for the owner based on the results.
2: Scheme quotation
Before the quotation, the designer will make a preliminary home layout plan based on the original floor plan, and communicate with the owner about the material, structure, color, pattern and other information of the customized wardrobe product. Next, the designer will give the owner a corresponding quotation. The price of the cabinet is usually calculated in square meters. The price of wood with different brands, different plates or different categories will be different. In addition, the uniform plate, the matching hardware, the price per square meter is not the same. Customized wardrobe products of the same material often have price differences. However, to know the good and bad of custom-made wardrobe products, plate, hardware and installation each account for 1/3, so the choice of custom wardrobe can not be cheap, but should look at the brand and quality.
3: Out of the 3D renderings, determine the final plan
After the initial home floor plan and quotation are approved by the owner, usually the large custom brand will give the designer a complete design rendering in 4 days. This complete design rendering is usually the real 3D version. After the renderings are completed, the owner can also compare and adjust the product real-life maps of the storefront. In this 3D rendering, you can use product replacement to let you know the real effects of different products in the home space. Through the 3D renderings, the designer and the owner will finalize an ultimate design.
4: Product installation
After the plan is determined, the 3D renderings will be turned into production drawings and sent to the factory for production. In general, after the custom manufacturing process of the sheet metal products, after 15-30 days of production process and solid wood custom products, after two months of processing cycle, the customized products can be installed in the next process.
When installing, be sure to pay attention to the protection of other locations in the home. The key protection objects are floor, door cover, door, stairs, wallpaper, wall lamp, etc. To be on the safe side, the owner is best to follow up on the installation process. In addition, the installer should be reminded to pay attention to the pipeline protection so as not to break the line or blow the water pipe. When installing hardware such as handles, you can help determine the installation location on the spot to find the height or position of the most suitable family. For example, the handle of the cabinet or the heightening cabinet must be installed under the door.
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsdoggze.com