[ Chinese wardrobe net ] When you buy a wardrobe, you can't just look at the quality of the wardrobe, but also look at the wardrobe door, so how to buy a wardrobe door? The following website will tell you about the wardrobe door buying skills.
1, the door frame material and the thickness of the door panel are particular
At present, the frame materials used for the sliding door of the wardrobe (the whole wardrobe brand ) are mainly carbon steel materials and aluminum-titanium alloy materials, among which the aluminum-titanium alloy material is the most durable and durable; the thickness of the door panel is another point of attention for sliding doors. For wood boards, it is best to choose 10mm or 12mm thick plates, which is stable and durable when used. The thickness is less than 8mm, which will appear thin and light; the door panels with thickness less than 6mm are easily deformed and difficult to meet the requirements of normal use.
2, the seal determines the environment inside the wardrobe
In order to ensure that the two doors are staggered and closed, all sliding door products will have a gap. The general external pulleys need a spacing of 15 mm. This interval affects the sealing of the sliding door, especially in places with large wind and sand. The inside of the closet is easy to accumulate dust. Although most products have tops, the gap between the tops used in different products and the gap size is still relatively large. Try to choose products with small spacing and tight tops. For example, the product has a door spacing of only 5 mm, and the high-density tops basically prevent the intrusion of dust and keep the wardrobe and clothes clean.
3, the critical point of life is on the pulley
The key factor affecting the service life of the sliding door (the overall wardrobe brand) is the pulley. The design of the big brand's pulleys is about 15 years, and the pulleys of some counterfeit products may break down in 2-3 months, which seriously affects the use of sliding doors. The pulley of the closet door consists of two parts, one is the top wheel and the other is the bottom wheel. There are two ways to install the bottom wheel, one is implicit and the other is external. The hidden bottom wheel means that the bottom wheel is installed under the door. After the rail is placed, you can't see the wheel from the front and the back of the door. The material selection of the pulleys mentioned above, the pulleys of fiberglass materials are the most wearable on the market today. The pulley slides are complicated, the pulleys are smooth, pressure-resistant, wear-resistant, safe and reliable. Consumers should pay attention to the most. Households generally require more than 60,000 times of pushing and pulling.
4, the key to bearing, small pulleys can not be underestimated
The pulley is the smallest but most important hardware component of the sliding door (the overall wardrobe brand). There are three kinds of pulleys on the market: plastic pulleys, metal pulleys and fiberglass pulleys. The plastic pulley is hard, but it is easy to be broken. It will become awkward and hard when used for a long time, and the push-pull feeling becomes very poor. The metal pulley is strong, but it is easy to generate noise when it comes into contact with the rail. The fiberglass pulley has the toughness, wear resistance, smooth sliding and durability, and is the best pulley material available today.
5, the track is good or bad is critical
The high-quality sliding door (integrated wardrobe brand) hardware is mainly reflected in the design and manufacture of the pulley system and the track, and the perfect combination of the two, the track is crucial. The quality of the track depends on the fact that it must have a curvature that can be matched with the pulley. It should be reminded that the good track is excellent in the strength design and the smoothness of the contact surface with the pulley, not the thicker the track wall, the better. At present, the track of the sliding door has two types of cold rolled steel track and aluminum alloy track. Rails are not always good. It should be said that good aluminum rails are superior to rails in some respects, especially in terms of noise immunity. In addition, it is necessary to pay attention to whether the product has a stop block and an upper and lower rail positioning system, whether there is a glass anti-collision strip, whether the bearing type pulley is smooth and silent when pushed, whether a shock absorption system is placed in the bottom wheel, whether there is a door height adjusting device, etc. .
Operating Room Anesthesia Trolley Series
Medication Cart,Emergency Cart,Hospital Colorful Dirt Trolley,Isolation Cart
NANJING TIANAO MEDICAL INSTRUMENTS MANUFACTURE CO.,LTD. , https://www.tianaomedical.com