High Speed Single Color Flexographic Printing Machine (WS801-700GS)

Model NO.: WS801-700GS
Structure: Stacked
Application: Flexible Packaging Printing
Automatic Grade: Automatic
Printing Speed: 130m/Min
Maximum Printing Width: 650mm
Printing Material: PVC.BOPP,CPP,Pet,Paper
Trademark: AOCHI
Transport Package: Wooden Case
Specification: CE
Origin: China (Mainland)
HS Code: 84431600
High Speed Single Color Flexographic Printing Machine (WS801-700GS)

High Speed Single Color Flexographic Printing Machine (WS801-700GS)
High Speed Single Color Flexographic Printing Machine (WS801-700GS)
High Speed Single Color Flexographic Printing Machine (WS801-700GS)
High Speed Single Color Flexographic Printing Machine (WS801-700GS)


Major performance:
Model WS801-700GS
Printing color        1color
Printing width  650mm
Web path width   700mm
Printing length (repeat)    200 ~ 889mm (8"~ 35")
Highest machine speed 150 meters/per minute
Highest printing speed      130 meters/per minute
Plate thickness   1.7/2.282.84mm
Tesa tape   0.38mm
Anilox roller      350 LPI    1PCS   
Register precision    Longitude ±0.15mm
Transverse ±0.15mm
Unwind reel diameter      Φ800mm
Rewind reel diameter    Φ800mm
Tension scope    3 ~ 50kg
Tension precision        ±0.3kg
Unwind and rewind web cylinder Φ76mm (inner diameter)
Unwind and rewind material holder   Air shaft
Air supply  0.6mpa
Press power     Mechanic control
Trapping roller Pneumatic control, max. power 150kg (Japan SMC)
Doctor blade  Double side enclosed type
Inking Auto cyclic system, twin diaphragm pump
Inking distributing deceleration motor (reduction ratio 1 : 50)
Drying sources Electric heating /Infrared(hot air)
Drying power     9kw
Air blower (large)   1.1kw / 1 pcs
Master motor power    3.0kw (reduction ratio 1 : 3)
Machine power   15kw
Outline size 2.7m×2.15m×2.25m  
Deviation correction system      Auto hydraulic pressure                China
Printing plate lifting system Auto hydraulic pressure               China
Tension control           TC818
Conventional bearing  Japan
Unidirectional bearing   Germany
Frequency conversion controller  Japan
Power 440 3phase and 60/50hertz


Acceptable printing material
LDPE : 28 ~ 100μm                           HDPE : 25 ~ 100μm                Aluminum : 15 ~ 80μm
PVC : 25 ~ 70μm                                CPP : 20 ~ 60μm               PP : 23 ~ 65μm
NY : 20 ~ 50μm                                 PET : 16 ~ 60μm                        OPP : 18 ~ 70μm
BOPP : 17 ~ 60μm                             OPA: 20 ~ 60μm               Plating film : 30 ~ 80μm
 
Major configuration
The Controlling System
1.The operator can preset printing numbers on the auto-counter and the machine will stop at the preset number.
2.The machine will stop at non-feeding.
3.It is equipped with a 3.0kw frequent inverter., reduction ratio 1 : 3
4.Auto tension control by TC818
 
Unwind and rewind
1.Machine should have one unwind and one rewind
2.Material holder use air shaft  
3.Unwind with auto deviation correction system (EPC)
4.Powder brakes by unwind
5.Powder coupling by rewind

Printing
1.Stainless steel ink pan
2.Low speed and full load startup; stable running by tension control when increasing and decreasing speed; noise is decreased
3.Aluminum roller adopts the Japan semi-sealing small bearing; flinty oxidation, static and dynamic balancing treatments are conducted; low resistance and small flop.  
4.The special made modulus angular gears adopted; accurate printing size and full printing specifications (6.35mm is a spec)
5.The grouped and controlled bottom roller processed with Germany particular steel materials processed with special techniques and electrically gilded with 0.1mm hard chromium protective layers
6.Quick change-over with sleeve system for the engraved ceramic coated anilox rollers
7.Use eco-water / oil ink for printing.
8.The machine use hydraulic printing-roll loading system which can automatically load printing rolls and run inks after the machine alarm working signal.
9.The operation is easier and more convenient,the register is more accurate,and the lifespan is also longer
10.Chamber doctor blade system with ink container and circulating pump
11.EDGE position control
12.Good quality printing
13.Brilliance color appearance.
14.1 set of plate cylinders, sizes: 15″

Dryer
1.There are 1unit of 3.0kw temperature controllers.
2.There are 1unit of 6.0kw temperature controllers.
3.With the air exhaust, blowing and heating and ventilation settings; the heating system adopts the central thermostatic control system and group management.
4.With the cold air forming devices
5.With 1.1kw centrifugal blower (1pcs)
6.With 80w centrifugal blower (1pcs)
 
Printing sample:
High Speed Single Color Flexographic Printing Machine (WS801-700GS)

Others

Food Waste Compost Bin,Kitchen Compost Bin,Kitchen Compost Caddy,Compost Container For Kitchen

Ningbo Ifilter Purification Equipment CO.,Ltd. , https://www.ifiltor.com

Posted on