[ Chinese wardrobe net ] After many houses are built, there will be a bathroom in the master bedroom. Due to limited space, many people who want a cloakroom have the idea of ​​changing the master bedroom bathroom to the cloakroom. This is feasible, but there are some things to be aware of when making changes.
First, the need to pay attention to the transformation
More spacious and independent cloakroom, the sanding box on the lower left side is a shoe storage box. It is not afraid of dust and has a window for easy searching. The bottom of the left side is a drawer near the wall. It can be used with a compartment internal storage to store underwear, or it can be stacked. Clothes; the upper thin drawer is a storage compartment for storing and tying; the middle is what I call the mirror, which is an indispensable object in the cloak, in order to avoid the best arrangement of light sources above or around the shadow mirror;
If the wall in the bathroom and the next room is a non-load bearing wall, the layout can be optimized as much as possible. For example, to reduce the space between the cloakroom (the main side of the cloakroom uses the long side, the actual utilization rate of the short side is very low), so that the room is not adequate, and the wall is occupied. The backboard of the cloakroom cabinet can be directly added with gypsum board to form the partition wall. Wall/partition wall occupation;
The drain pipe of the original bathroom, the floor drain should not be sealed. Use a sealed cover and a mildew-resistant neutral silicone seal. It is best to use the floor or carpet on the floor. If you want to change back to the bathroom or sell the house after many years, it will not be saved because of time and trouble.
The hot and cold water on the wall should be kept as much as possible, and it will not affect the use of the cabinet. If it is cut off, remember to mark the water inlet position of the bathroom to facilitate the increase of the waterway in the future;
Because there is noise from the drain pipe (refer to the drainage of the lower layer, what are the advantages and disadvantages of the same layer of drainage that can be extended?) The noise-reducing paste can be used to wrap the pipe before the ceiling, which can reduce the noise to 35-40 decibels;
Ceilings use gypsum board ceilings, cabinets and ceilings must retain a gap of at least 30mm, otherwise the direct topping will be very depressed. The cloakroom cabinet does not require a cabinet door, and if there are concerns about the curtains. In addition, if it is a drainage layer, remember to reserve the inspection port at the ceiling below the trap to facilitate maintenance.
After changing to the cloakroom, the custom-made wardrobes mentioned were not assembled in a small space and could only be assembled and assembled in batches. In fact, the production of the scene is the most appropriate, flexible, and more environmentally friendly (do not believe in the flicker of building materials businesses);
With a cloakroom, if the wardrobe layout and interior layout are unreasonable, a cloakroom will be ruined. The large size does not mean that the space can be conveniently and reasonably used. Therefore, the main purpose of the cloakroom is determined first. Whether it is the storage of everyday clothes or the storage of off-season clothes. Seasonal clothes are stored according to personal habits and clothes, and the proportion and quantity of suspension, trousers, skirts/coats, stacks, shoes, jewelry, underwear, suitcases, etc. are determined. It is highly recommended that the IKEA CommScope series cabinet hardware is affordable and flexible, but remember to reserve the size. The thickness is divided into 350, 600mm, and the width is divided into 500, 750, 1000mm (to ensure the net size of the installation hardware is reduced by 35mm, otherwise it can not be installed);
The best utilization and convenience of the cloakroom is the best for the one-line/two-shape. The L-shaped corner is the second, because although it seems to take advantage of the space, it will occupy a long-side area with a large storage capacity and waste space. If it is L-shaped, the short side should be as thin as possible, or install a mirror, a clothes hook, a remake dressing table, etc. here;
In the lighting aspect, the installation of the anti-glare treatment of the downlight can be installed. If the groove for installing the curtain is reserved, the lamp socket can be arranged with simple illumination. The dressing table and the mirror are installed on the wall to further reduce the shadow;
Because most of the bathrooms are made of air ducts, and the bathroom windows are sealed (or not at all), an exhaust fan is installed on the ceiling. Ensure that the air is ventilated and the clothes are moldy and moisture-proof. There is no need to do extra moisture treatment, except for extreme moisture in the extreme areas, which is not necessary.
Product categories of Mini Ball Pan, we are specialized manufacturers from China, Semicircle Cupcake Pan, semicircle Muffin Pan suppliers/factory, wholesale high-quality products of semicircle baking pan R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Semicircle Cupcake Pan, semicircle muffin pan, semicircle baking pan, semcircle bakeware, mousse cake pan, cupcake tray,Ball Pan
Jiangmen Shuo 'an Baking Products Co., LTD , https://www.soanbaking.com