The plastic plate substrate is a MDF, the surface is vacuum-blended or a single seamless PVC film forming process is used. It is the most mature cabinet material, and the daily maintenance is simple and relatively solid. The molded door panel is made of a MDF and is formed by veneering PVC as a veneer by high temperature hot pressing. Can be processed into a variety of shapes. The nature is basically similar to that of blister.
Advantages: rich in color, looks like solid wood, no cracking, no deformation, resistance to heat, stain and fading, uniform color than solid wood, high degree of abrasion resistance, rich in shape.
Disadvantages: It is easy to open the glue, and the high temperature resistance is poor. Even a small cigarette will damage the surface film.
However, the quality of many PVC plastic door panels made in China is not enough . The quality of plastic cabinets, in addition to the influence of the substrate, the quality of the PVC film is relatively large, the poor PVC film has a short aging cycle, short service life, and also has a relationship with the plastic equipment, the quality is not easy Crimping and foaming. Blister is divided into two major categories: domestic and imported. Domestically produced is easy to peel and peel, but imported is more expensive.
Wind&Solar Hybrid Charge Controller
Wind&Solar Hybrid Charge Controller,Wind Turbine Controller,Wind And Solar Hybrid Charge Controller,Controller For Wind Solar Hybrid System
Wuxi Smaraad New Energy Technology Co., Ltd. , https://www.smaraadenergy.com