Barcode printers encounter ribbons will not be recycled?

Barcode printers will not solve the problem of recycling the ribbon. If the printer is suitable for thermal and thermal transfer, then there will be a problem at this time. The same barcode printer should print both thermal label paper and copper. If the paper is self-adhesive, it is necessary to change the barcode paper and the barcode ribbon back and forth. Sometimes the ribbon recovery does not move, and the used carbon ribbon cannot be recycled normally.

Cause Analysis:

This situation is definitely the thermal printing method originally used by the barcode printer. After replacing the coated paper label and the ribbon, the printing method is not modified into the thermal transfer method, which will result in the ribbon recovery shaft not being printed. Automatically recycle used used carbon ribbon.

Solution:

As long as the printing method is changed from thermal to thermal transfer in the driver file of the barcode printer, the parameter modification can be solved to solve the problem that the barcode printer does not recycle.

In addition, the printer does not recycle the ribbon. It may be that the ribbon is not installed. Just insert the ribbon shaft into the bayonet.

Or restore the barcode printer device factory settings.