[ Chinese wardrobe net ] The market's solid wood furniture is very popular among consumers, but there are still many consumers who don't know the relevant knowledge of solid wood furniture. Today, Xiaobian will take you to understand the advantages and disadvantages of the following solid wood furniture. :
advantage:
1. After the solid wood panels are painted, there is no unevenness on the surface of the rubber joints and slats, and the physical properties are relatively stable during long-term use;
Second, the high utilization rate of wood is in line with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, solid wood panel decoration board is more suitable for the use of furniture and decorative functions;
3. Although the amount of glue applied to the solid wood panel is larger than that of the solid wood panel, the protection of the double-sided thick veneer and the edge of the four-sided thick veneer are actually only two sides and eight sides of the glue, so the adhesive in the solid wood panel The chemical substances volatilized through the glue seam are far lower than the volatilization amount of the solid wood wide board and the solid wood laminated material, which is more environmentally friendly and healthier.
4. Because the core board is made of a small anisotropic wood, the surface of the board is uneven and the degree of warpage is small. The upper and lower sides are covered with two thin wooden veneers, which can better eliminate the warpage and cracking of the board surface. Deformation, and can improve the physical strength of the board in all directions;
5. Sliced ​​thin wood veneer is a selection of excellent logs of large diameter grade, and is carefully selected according to texture and color, and is manufactured by high precision equipment and scientific planing method. Such processing technology is very good in texture and color, and the texture is more prominent after painting. The production of the positive furniture can create a harmonious and high-grade sense of value;
Disadvantages:
1. In addition, due to the different textures of the individual slats, the hardness is different. Even if the thickness of the slats is uniform, the thickness of each slat can be made uniform, so that the slats on the surface of the slab are uneven. After the paint, the unevenness of each slat is more obvious;
Second, if the quality of the horizontal spell is poor, the brain will also spell out the obvious horizontal joint glue joint. If the strength of the cross stitch is not enough, it is easy to crack at the seam. Therefore, the furniture produced by the general solid wood wide panel can see the surface of the furniture paint in the oblique direction, and can see the height of the slats and the glue joint between the slats. If the materials are carefully selected and the technology is scientific, this phenomenon will be smaller, but it cannot be fundamentally avoided;
Third, due to the large anisotropy of the wood, the wide panel is easily deformed, and the glue joint between the panels is exposed, so that the disordered lines between the panels can be visually seen, and the firmness of the stitching can affect the cracking of the panel. Very large, coupled with the paint process, there is the effect of the moisture in the paint on the wood. Even if the processed product is very flat, in the daily use, the surface of the solid wood wide panel is prone to cracking and cracking. These phenomena will become more apparent due to the humidity of the air over time. Moreover, the wider and thicker the width of the panel substrate, the more obvious the problem is;
Fourth, this kind of technology produces furniture sheet, which has high requirements for material selection. The color, texture and growth period of the board are basic requirements, resulting in low wood utilization rate, high waste and high cost. In particular, the growth period determines the degree of hardness of the wood, which directly affects the degree of deformation during use. This feature is almost indistinguishable from the well-painted household products, and only the brain bottle is used for a long time. Even if the selection of materials is very strict, the production of large-faced furniture, such as countertops, door panels, etc., still lacks a sense of body, and the wood grain is slightly messy and cannot create a calm and gentle body atmosphere.
Shoulder bag, crossbody bag, hand bag, mommy bag,Hiking bag,Thermal box
Dongguan Jinying Handbags Co.,Ltd , https://www.jinyingfashionbag.com